Skip to content Skip to footer

A Common Challenge.  Multiple  Missions.

Different missions, with the same operational challenge.

Remote surveillance, reconnaissance drones, maritime monitoring and autonomous systems operate in very different environments, but they increasingly face the same challenge: staying operational for longer without making energy supply, maintenance or logistics the limiting factor.

A remote surveillance installation may need to remain active for weeks without intervention. A reconnaissance UAV benefits directly from additional hours in the air. A maritime sensor platform may need to operate for months before maintenance is practical.

The applications are different, but the underlying engineering question is remarkably similar:

How much energy does the mission require, and how can we carry that energy to the application in a practical way?

This is where hydrogen becomes interesting.

Engineering the mission backwards from energy demand.

The starting point does not have to be the fuel cell or the hydrogen bottle. It can simply be the mission.

A system operating at an average electrical load of 50 W for 600 hours requires approximately 30 kWh of electrical energy. A UAV consuming an average of 300 W over a three-hour reconnaissance mission requires approximately 0.9 kWh.

From there, the required hydrogen quantity, fuel-cell capacity and storage concept can be defined.

In simplified form:

Average power × mission time = required electrical energy

The hydrogen storage can then be selected around that requirement rather than designing a completely new energy system for every application.

A limited family of bottles can cover very different requirements.

For smaller and mobile systems, this could mean exchangeable pressure vessels in the range of approximately 3, 5 or 9 litres. For stationary installations, one or several 50-litre cylinders can provide considerably larger energy reserves.

At around 300 bar, the order of magnitude looks like this:

Hydrogen storage Approx. H₂ content Approx. usable electrical energy* Typical role
3 L ~0.06 kg ~0.8–0.9 kWh Lightweight/mobile applications
5 L ~0.10 kg ~1.3–1.5 kWh UAVs, robotics, mobile systems
9 L ~0.18 kg ~2.4–2.7 kWh Longer-duration mobile systems
1 × 50 L ~1.0 kg ~13–15 kWh Fixed surveillance, maritime systems
2 × 50 L ~2.0 kg ~26–30 kWh Multi-week stationary missions

*Illustrative engineering values based on approximately 40–45% net electrical conversion. Actual usable energy depends on pressure, temperature, residual bottle pressure, system efficiency and operating conditions.

This does not mean that every application should use the same physical cylinder. Weight, certification, installation space and environmental requirements are very different for an aircraft than for a stationary surveillance installation.

The objective is different:

Use as few storage concepts as practical and scale primarily through bottle size or bottle quantity.

Example 1: Remote surveillance for several weeks.

Consider a remote surveillance installation with an average electrical demand of approximately 50 W.

Operating continuously for 600 hours — about 25 days — requires roughly 30 kWh of electrical energy.

That brings the energy requirement into the range of approximately two 50-litre hydrogen cylinders at 300 bar, depending on the efficiency and operating conditions of the complete system.

For an installation consuming closer to 100 W, the same hydrogen inventory would provide approximately half the mission duration.

This immediately creates several engineering options. Two cylinders can be connected through a common manifold. Additional cylinders can extend the service interval. Empty cylinders can be exchanged rather than requiring the complete power system to be moved or recharged.

Instead of engineering a special energy storage system for every required mission duration, the operator can scale the energy reserve through the number of bottles installed.

The fuel-cell system remains largely unchanged.

Example 2: Extending UAV reconnaissance time.

The same principle applies at the other end of the application spectrum.

Consider a fixed-wing UAV requiring approximately 300 W of continuous electrical power during cruise, with a battery supporting temporary higher-power demands such as take-off, climbing or maneuvering.

A three-hour mission represents approximately 0.9 kWh of continuous electrical energy.

That requirement is already in the range that can be supplied by a compact 3-litre hydrogen storage system at around 300 bar under suitable system conditions.

Increasing storage to 5 or 9 liters provides additional energy, but aircraft integration introduces another consideration: endurance does not increase perfectly in proportion to hydrogen volume. A larger pressure vessel also adds weight and can influence payload capacity, center of gravity and aerodynamic performance.

The engineering task is therefore to find the point where additional hydrogen still produces a useful increase in mission endurance.

For the operator, however, the logistics principle remains familiar: prepare a filled bottle, install or exchange it, perform the mission and return the depleted bottle into the refilling cycle.

Standardise the logistics where it makes sense.

This is where the first hydrogen application starts to create value beyond itself.

Once an organisation has established how hydrogen is supplied, transported, stored and handled, many of the same processes can support additional applications.

A practical hydrogen logistics concept could include a limited number of approved cylinder types, defined storage locations, bottle identification and inventory management, exchange procedures, pressure regulation concepts, personnel training and a reliable route for returning and refilling depleted cylinders.

For stationary systems, several identical bottles can often be more practical than introducing another specialised larger storage solution. Capacity can be increased by adding another cylinder to the manifold, while the handling process and replacement stock remain unchanged.

For mobile platforms such as UAVs, weight may justify a dedicated lightweight composite cylinder. Even here, however, the hydrogen supply, filling infrastructure, operating procedures and much of the organisational experience can remain common.

The goal is not identical hardware everywhere. It is a common hydrogen logistics philosophy across different mission systems.

And that is where the next application becomes easier.

A hydrogen infrastructure initially established for remote surveillance can create the basis for supplying reconnaissance UAVs operating from the same region.

The same hydrogen supply chain could subsequently support a maritime surveillance buoy, autonomous ground systems, communication equipment or temporary off-grid sensor installations.

Each application still requires its own engineering. Power levels, fuel-cell configuration, storage integration, batteries and environmental protection will be different.

But the organisation no longer starts from zero.

The hydrogen supplier exists. Storage and transport have been addressed. Personnel understand the handling requirements. Procedures are established and hydrogen has become part of the operational energy concept.

The first mission therefore does more than solve one endurance problem.

It creates the capability to address the next one.

A common challenge. Multiple missions.

Longer surveillance. Longer reconnaissance. Longer autonomous operation.

The platforms may be different, but their need for energy is not.

Solve the hydrogen logistics once, and the next mission may be considerably closer than it first appears.

 

More information?

I'm interested in

Interested in extending your operating time?

Tell us a little about your application. We'll estimate the right combination of **fuel-cell power, battery buffer and hydrogen storage** to match your mission.

Typical electrical power during operation.
Maximum power required and for how long. (In minutes)
How long should your system operate without intervention? (In hours)
Go to Top